Activated carbon ink, 100 mL, water-based

Activated carbon ink, 100 mL, water-basedActivated carbon is used for the preparation of electrostatic double layer capacitors. Formulated as an ink, the activated carbon can be coated on a current collector such as aluminum, copper, or graphite, dried, and prepared as electrodes for capacitors. An electrochemical capacitor has two electrodes, separated by a separator or a membrane that is soaked in an ionically conductive electrolyte. This activated carbon ink is suitable for particularly

Adhesive Polymer Tape on the tab allows for immediate hot sealing

Full sintered diamond blade: 4" x 0

especially prohibited from using in Class I environments (flammable gasses & vapor)

Dimension: O

Orientation: (101)

8 pt 0 2 MicrosoftInternetExplorer4

cm   (If you would like to measure the resistivity accurately

electrode holders

01Ohms/cm (If you would like to measure the resistivity accurately

The temperature sensor is installed inside the chamber to touch with the container to protect the sample from over-heated

Note that the cell does not inherently distinguish between ionic and electronic conductivity and measures total conductivity

Notice: This hydraulic pressure is not equal to the actual pressure applied on the pressing rod