CytoPel 502AC

CytoPel 502ACCytoPel 502AC is an acrylic polymer at 2% concentration in a fluoro solvent. Thin films dry in seconds at room temperature to a surface energy of 6 10 dynes cm and water contact angles as high as 115. CytoPel at 2% is particularly well suited for coating membranes and provide an oleophobicity grade of 7 8. CytoPel may be applied by a number of methods including dipping, brushing, damming, capillary or syringe dispensing. CytoPel does not occlude pores

The superhydrophobic ink is water and media repellent holding samples in the well without cross-contamination of well contents

Lightly roll on the Topcoat using a new roller cover

Application: Roll-on (Gravity feed HVLP for large projects)

CytoCure has excellent resistance to water-vapor

Cure the inks with LED lights (12W/sqcm @ 385/395/405 nm) for 3 seconds with the light source ~4 mm from the mask (alternatively irradiate with a medium pressure vapor mercury lamp (220-320 nm UV

Water contact angle: over 140°

FluorN 560-series (561 and 562) are 100% solids

Package options: 150 gram (bottle)

Add the crushed pellets of 100LC to fluorosolvent slowly (0

Substrates for MicroCure include painted surfaces

s (at 25°C)

FluoroPel 600 series is a fluoroacrylic copolymer solution in a safe and non-flammable fluorosolvent (BP=60°C) for coating membranes