FluoroPel 1600AF_1%_HT170

FluoroPel 1600AF_1%_HT170FluoroPel 1600AF_1%_HT170 is a one percent fluoropolymer solution in the solvent HT170 (BP=160C). Thin films dry in 4 6 hours at room temperature to a surface energy of about 16 dynes cm. Heating to 180C for 30 minutes optimizes adhesion and reduces the surface energy to about 10 dynes cm. FluoroPel is recommended for spin, spray or blot applications where extreme UV resistance is needed. Size: 25 grams Shelf life: Two years (in sealed unopened

Longer if you dilute with butyl-acetate

30% relative humidity)‎

- Novec 1702 is equivalent to CytoPel 600 0

air-cured coating formulated for spray

odorless and colorless filmContact angle to water: >115° Contact angle to oil: >65°Hardness: >2B pencilFlammability: Non-burningHeat stability: Continuous 150°CMax heat stability one hour: 250°CRefractive index: ~1

and other telecommunications gear to prevent rain fade

CytoCure DB is a family of hydrophobic and oleophobic conformal coatings

Coverage:  One 125 ml bottle will coat 2 mid size cars

contact angles to water greater than 95° and roll-off angles of less than 5° can be achieved

Ease of drying: Dries at room temperature in ~60 minutes

To brush-on or wipe-on a thin layer

0 mm fluid tip) set at full fan and 2 to 2