FluoroPel PFC804A

FluoroPel PFC804AFluoroPel 804A is an electronics grade conformal coating at a concentration of 4% in a quick drying non flammable solvent. Thin films (~0. 4 microns) dry in a few minutes at room temperature to a surface energy of about 10 dynes cm, water contact angle over 110, and mineral oil contact angle over 70. Warming to 50 to 100C for 10 minutes will improve coverage and adhesion. Please contact Cytonix for help with product selection or with any questions.

CytoCure has been shown to reduce ice accumulation significantly on refrigerator evaporator coils and stainless steel relative to uncoated metal

Taber abrasion: Super-hydrophobic after 10 cycles with CS10 wheel

PFC110 has a boiling point of 110°C

TROUBLE SHOOTING: (1) Coating does not have a high contact angle: This may result from coatings that were applied too thick

MicroCure IceSlip 83Y is an additive for solvent-based epoxy and polyurethane paints

CytoZane has excellent resistance to water-vapor

CytoPel N-1700 is similar to Novec 1700 (2%)

Size and packaging options:  100 grams (in 125 ml bottle)

s (at 25°C)

The ink may be thinned with triethyl phosphate

Remove the part from the FluoroPel solution slowly (1 cm/second)

This version of CytoSyl is fluorine-free and it is a silane-functional polydimethylsiloxane (PDMS - Silane)